WE ARE YOUR 1-STOP INTERNET SOURCE FOR MOTORIZED DAMPERS, REPLACEMENT DAMPER MOTORS, RETROFIT ZONING SYSTEMS AND MORE!

 

DON’T SEE IT ON OUR WEBSITE? CALL US, WE HAVE A SOLUTION!

Retrozone&Flexdamper are trademarks of Retrozone Inc.

 Free Standard Shipping on Orders $25+ Continental USA only

  Shipping to Alaska, Hawaii, and International shipping to Canada extra. Please place the order and factory will advise of additional shipping amounts prior to shipping. 

Credit Cards will not be charged until shipping amounts are verified. 

 

Expedited shipping available. Please call for pricing. 

EWC MAN Honeywell

MSTN Trol A Temp AOBD damper Replacement Motor




Note: This motor has been discontinued by the manufacturer and

 is NO LONGER AVAILABLE.


SEE REPLACEMENT: LMB24 KIT 3

*Update July 24, 2019 See our new Belimo to Trol A Temp and EWC kit to replace this motor with a modern industry standard Belimo LMB motor, better motor at less cost, with more features, and a 5 year warranty! 

See: Trol A Temp MSTN EWC MAN Honeywell damper motor to Belimo upgrade Kit 3 Here


MAN / MA-5P The EWC MAN motor is a 2 Position, power-open, power-close actuator. Used on old-style, standard opposed blade dampers sold by EWC, Trol A Temp, Trol-A-Temp, Retrozone, and Honeywell Rectangular dampers. Round dampers with this motor require a different motor with 45 degree travel.For application questions, contact us at support@retrozone.com. The Man, power open, power close actuator is used with old-style, standard opposed blade dampers. MAN actuators are only interchangeable with other MAN style eight terminal motorsThis motor is interchangeable with the Honeywell MSTN motor for Trol-A-Temp or Trol-A-Temp dampers. 24-volt (AC), 6 Volt Ampere (VA), 50- 60-cycle, two-position motor actuator used with all Honeywell AOBD, AOBD-BM, and IOBD automatic opposed blade dampers. MSTN is a uni-directional motor that requires Single-Pole, Double-Throw (SPDT) switching to drive the damper open and closed, common in most zone control panels. It uses a wafer switch to power the synchronous motor for only 30 seconds while the motor is moving between open and closed or vice-versa. When the motor reaches the open or closed position, the internal switches cut off power to the motor. This listing is for the motor only, and not the linkage that drives the blade. These older style dampers used no blade bushings and can rattle, or have problems with the non replaceable drive linkage. Due to the high parts cost of the replacement motors, these dampers can be replaced with many different brand new dampers, contact us at support@retrozone.com for more information.


This website makes use of cookies. Please see our privacy policy for details.

ACCEPT

Deny