Copyright RetroZone inc.2020 

BH Kit 3


Belimo Trol A Temp MSTN EWC MAN to Honeywell damper motor upgrade kit


The newest Retrozone Damper Motor upgrade to keep your old dampers working!

This kit is a Belimo powered kit to replace both the Honeywell Trol-A-Temp MSTN and EWC MAN motors pictured with a Belimo LMB24. Please note the old Trol A temp and EWC motors are shown for illustration only

This kit uses the Industry Standard Belimo LMB electronic commercial motor to replace old and broken Honeywell MSTN and EWC MAN 8 terminal motors. This Belimo motor carries a 5 year factory warranty, and its brushless design means it will far outlast the factory OEM motor-at less cost!

This kit mounts in minutes with included Hardware, and offers a clutch for manual operation.

Belimo LMB24 Motor features infinite set point adjustments to allow minimum bypass air, a valuable feature not possible with the old motor.

The Belimo LMB24 features a Brushless Electronic design with 5 year factory warranty insure many years of trouble free service.

All motor upgrade kits Come with self tapping screws and full instructions, mounts in minutes.

The Belimo motor may be reused on our fine damper bodies in case of old damper malfunctions.

Operates on same 24vac damper wiring as the Honeywell MSTN and EWC MAN 8 terminal motors. All electrical hook up instructions included.

Belimo LMB24 Motors will wire to any brand zone control panel already used to control these motors, and can be wired directly to a thermostat with no relay needed.

Belimo LMB24 Motor wire directly into system or zone panels using old Trol A Temp or EWC motors.

Belimo LMB24 Motor are never obsolete, if the a original Trol A Temp or EWC damper breaks down in the future, the LMB motor can be removed and remounted on our fine SD3085 Damper body, sold separately.

Installs in minutes with included self tapping screws. Useing existing wires

24volt AC operation.
95 Second run time
Reversing switch
Clutch operation
3 terminal operation
1.5 VA intermittent operation

From Damper Direct, where zoning is our only business! We offer the service, support, and technical resources to help you design or service your Zone Control System.
We handle all major brands including Retrozone, Honeywell, EWC, Durozone, Enerzone Systems Corp., Robertshaw, Invensys and more. If you dont see it, please ask and we can do a special Order for the part you need. Call 972 633 8104 for technical support or application questions.

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment