Copyright RetroZone inc.2012 


Motorized Damper Replacement Motors

Don't see what you need? Call us and we can usually help, because dampers and zone control is our only business!

Shipping Special

All Motors Qualify for free Shipping in the Continental US 

 

Universal replacement motors and kits also available-If your damper has any any kind of shaft, you may be able to use our Belimo LMB24-3-T motor and adapt it to you current damper shaft.

These products and more: Honeywell Retrozone EWC Enerzone Systems Corp ESC Invensys Robert Shaw Durozone Young Regulator Tech Tip: Most 24vac dampers used on zoning systems are completely interchangeable with other brands, don't spend too much thinking you must find a certain brand or model number of damper. In almost all cases, any open/close 24vac damper will work with almost any other brand of zone controller-call us for more information.
Belimo Replacement Motors for Retrozone Super Duty and many other commercial quality damperswe are a full line Belimo Distributor and offer hundreds of different Belimo motors, valves, and actuators. Below are some of our more popular offerings:

 

 

Belimo to Honeywell and other retrofit damper motor kit

ZD,ARD, M847d1012 $ 78.00

 

 

Tired of replacing spring return damper motors that get hot and burn out? The Belimo to Honeywell Retrofit Kit BHK-24 gets the the premier commercial grade Belimo LMB damper motor and adapter kit for about the same price as the Honeywell M847D1012 2 wire spring replacement motor. This kit will also work on virtually any other damper that has a shaft under 3/8 of an inch diameter. 

*Retrofits the industry leading LMB24-3-T motor on to many residential dampers.
*Gets rid of spring return motors.
*Works with any brand of standard 24vac zone control system.
*Saves energy, extends motor life, far more powerful motor with 5 year warranty.
*requires three wires to motor and the mounting of the anti-rotation bracket with two self tapping screws, included. 
*24vac 2 va damper motor 
*Replaces 3 wire motors with external damper shaft 3/8 or smaller
*Add extra  hardware (not included)  and simple modifications to work on almost any damper

Spring return damper motors pull 8 to 10 va of continuous power since they must overcome the return spring. Besides wasting energy, the spring return motors get very hot, contributing to their often premature failure. The Belimo LMB24-3-T retrofit kit motor uses just 2va for  90 seconds, and never even gets warm to the touch! A five year warranty is best in the business, so stop replacing those overpriced spring return motors!  

Your current damper has just two wires to the motor, will this 3 wire motor work?  Yes, but you will need a third wire from the zone control panel or thermostat to allow this 3 wire motor to work-very often, standard 4 wire thermostat wire will have been used so check the cable for extra wires. Most zone control panels support three wire motors, including all Honeywell panels, check your zone control board damper outputs for an unused terminal. 

Even if your zone panel has just two damper outputs, you can still use this kit since the Belimo LMB motor will accept an alternative wiring procedure that places full time 24vac power on terminals 1 and 2, and then uses the current zone board output for terminal 3.

 


 

Belimo LMB24-3-T $76.00 Each

+ FREE Shipping in the Continental United States.

Our most popular commercial grade motor that mounts on almost any driveshaft to give powerful, quiet control. Takes 24vac or DC, since motor is internally a DC drive motor with microprocessor based circuitry that kills power when motor reaches end of travel-this motor never even gets warm to the touch. 5 year warranty. *Motor is used on our popular "Super Duty" SD series of Round dampers. Also used on our popular SD3085 Series of Rectangular Dampers. *Can be adapted to almost any damper using a drive shaft.*Use a fraction of the power of spring return dampers .*unique internal circuitry allows "one output control" from any thermostat or single pole switch (no relays needed!), unlike almost any other power open/power close damper motor- You get the best of both worlds, ease of wiring like a spring return, reliability and energy efficiency of a power open, power close 3 wire damper. *Using a single pole, double throw switch wit a center off, this motor can be stopped anywhere in its range, and will hold position in the airstream for balancing applications.

Belimo LMB24-3-T damper motor isoBelimo lmb 24-3-T mounted

Super Duty damper motor

 

Belimo LMB24-3-T



Belimo TF24-TF110 Commercial Spring return motor $87 each

+ FREE Shipping in the Continental United States.

Now available in 24vac and 110vac. Want the ease of wiring and automatic return of a spring return in a quality commercial grade motor? The TF 24 Commercial Belimo Spring return is the highest quality spring return motor available in this price range, with a five year warranty.

The TF24 is more powerful, and uses less power, than any residential grade spring return motor. How is this possible? The Belimo TF24 used a gear train motor to multiply the torques and power, and therefor uses a much smaller motor to produce far more power.

While residential grade spring return motors use 8 to 10 VA of power when energized, the TF24 with its smaller motor and more powerful gear train uses just 2.5 VA of power for cooler running and longer life.

Normally open? Power Close? Not sure on your application? Not a problem, just dismount and flip the motor to its other side to change its direction. Unmatched quality and versatility. 5 year warranty, 24vac or 110 vac.

TF24 Motor





Belimo LMB24-SR-T O-10volt DC modulated motor $141.65

+ FREE Shipping in the Continental United States.

 

SGF-24 Controller $74

+ FREE Shipping in the Continental United States.

 

This popular motor takes O 0 to 10 volt or 4 to 20ma input signal to move to variable position. Used with many commercial or advanced home automation systems. Input voltage in 24volts AC, use with any of our transformers.

For Balancing applications use with the SGF wall mounted controller; simply set the graduated knob to whatever position you want the damper to go to, and walk away-The damepr blade will travel to that exact position and then stop.

Belimo LMB24-SR-T O-10volt DC modulated motor



 

SGF-24 Controller



 Belimo Carrier Infinity, VVT, Trane Varitrac, and other Zone Control systems

 requiring a 15 second motor on Timing. $90.00

Free Shipping in the Continental United States.

Use This Special Belimo motor as a high quality replacment motor on many Carrier and Trane Systems. there is no need to pay hundreds of dollars from the "factory" source when this high quality replacement motor has proven itself in that application.

Belimo Carrier Infinty, VVT, Trane Varitrac,


Belimo snap on end switch p/n S1A or S2A $53.10

+ Free Shipping in the Continental United States.

Use the Belimo end switches to add add end damper blade open or closed verification to any application. Switch neatly snaps onto any existing LMB style motor. SPDT or DPDT contacts. S2A is not a stock item. S1A $45.10 each

Belimo snap on end switch p/n S1A


 

Belimo snap on end switch p/n S2A


 

Retrozone and Damperdirect 3150 Replacement Damper motors

$63 + FREE Shipping in the Continental United States.

  • used on Retrozone 3150 series Rectangular spring return dampers, Also used on :

  • Ebay store "DamperDirect" 3150 series dampers

  • *Lennox, some spring return dampers

  • *Young Regulator, some spring return dampers

  • *Enerstat, some Spring return dampers

  • *Jackson Controls, some spring return dampers.

The 3150 damper replacement motor is the motor used on our popular spring retunr 3150 series replacement damper motors. If you purchased one of these spring return type dampers on ebay from our store "Damper Direct" then this is the motor you need as a replacement. Precise measurements shown are for other dampers that may use this motor, to verify dimensions.

This same motor has been used on other types and brands of dampers, including Enerstat, Lennox, Jackson Controls, Robert Shaw and others. Please do be aware some dampers use similar motors but the shaft dimensions are different, and that's why we include those dimensions here. But, if you are looking for a motor to replace one on a spring return rectangular damper purchased from us, THIS IS the correct motor.

For other applications, this motor says on its side "645 24V 60HZ 6W 60RPH 38398L-5-6-46" A yellow label may be attached that says "P/N 78G1001 24VAC .44 amp 60HZ"
This motor is designed to operate on 24 volts ac only. If you have any technical questions you may call us at 972 633 8104. We have most replacement motors for many brands of dampers, as well as some universal fit replacements.

If you do not see what you need, don't hesitate to call. All motors are new inventory. and full service and support.

Zoning is our only business! We offer the service, support, and technical resources to help you design or service your Zone Control System.
We handle all major brands including Durozone, Honeywell, EWC, Retrozone, Enerzone Systems Corp., Robertshaw, Invensys and more.

Retrozone and Damperdirect 3150 Replacement Damper motors


 

Durozone by DuroDyne replacement damper motors $74

+ FREE Shipping in the Continental United States.

Choose one of the following Durozone replacement part motors. For technical assistance, please call (972)633-8104.

All current Durozone replacement motors are available:

Item Code Description
35138 RM-RD/MS PO?PC Replacement Motor for RD & MS Dampers
35139 RM-MB PO/PC Replacement Motor for MD Dampers
35107 RMMP13 RD/MS Multi Position Motor *Special Order
35109 RMMP34 MB Multi Position Motor *Special Order
35141 RMSR024 24 Volt Spring Return Motor
35142 RMSR110 110 volt Spring Return Motor
35105 MSSR024 24 Volt SPMS & NSPRD Spring Return Motor

We have all Durozone replacement parts, if you do not see what you need, don't hesitate to call and we can do a special Ebay auction for other items we carry! All motors are new inventory and come with a five year warranty, and full service and support.

Zoning is our only business! We offer the service, support, and technical resources to help you design or service your Zone Control System.
We handle all major brands including Durozone, Honeywell, EWC, Retrozone, Enerzone Systems Corp., Robertshaw, Invensys and more. If you dont see it on ebay, please ask and we can do a special Ebay auction for the part you need.

 

 

Durozone p/n 35138 RM/RD/MS motor- Please note: If you have an older style Durozone Damper RD 3 wire Motor, Black with Five white terminals, the new RD motor p/n35138 is a direct replacement with four terminals.

 

Durozone p/n 35105 MSSR024 Spring Return Damper Motor for use with Durozone NSPRD and SPMS Damper motor. 

Durozone p/n 35141 RMSR024 or SPRD024 24 Volt motor for use with SPRD dampers.  

Durozone p/n 35139 RM-MB Motor for use with Multi Blade Zone Dampers.  

Durozone p/n 35142 RMSR110 SPRD110 Motor-110 Volt for use with SPRD Dampers. 

Durozone by DuroDyne replacement damper motors

 $74 + FREE Shipping in the Continental United States.



   

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment